Author:EVA PE Foaming Products Making Line Bike Butyl Inner Tube Making Line

Bike Butyl Inner Tube Making Line is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.

Bike Butyl Inner Tube Making Line:The roller has groove,used for crushing the raw rubber before palstication. As professional manufacturer of Bike Butyl Inner Tube Making Line, we can supply good quality of Bike Butyl Inner Tube Making Line.

Payment Terms of Bike Butyl Inner Tube Making Line is 40%T/T in advance, 70% balanced by T/T against the copy of B/L. We could offer the formular of Bike Butyl Inner Tube Making Line. Welcome you to inquire about Bike Butyl Inner Tube Making Line for more details. Look forward to mutually beneficial win-win cooperation with you. Our company offer service from soup to nuts. At the same time, can be customized according to customer's requirements of the Bike Butyl Inner Tube Making Line.

Bike Butyl Inner Tube Making Line is used for recycling waste tyres, and maximum recycling, saving resources.Bike Butyl Inner Tube Making Line is made up by waste tyre decompose machines,waste tire processing machine, waste tyre rubber crushing mill machine,screening magnetic separation transmission unit etc. When running the Bike Butyl Inner Tube Making Line, at first the whole waste tyres should be decomposed by waste tyre decomposing machines into small blocks about 3.5cm, then use the rubber crush mill machine(XKP400/450/560)to break the small rubber blocks,now we can get rubber particles and rubber powder , then use the screening magnetic separation to separate the broken wire and rubber parts totally.The fines which have processed by the sieve set twice conveyed by the belt will be put on the magnetic rolls,isolating wires,then make 10-40 mesh pure rubber powder(fineness optional).Unqualified powder will be come back to the crush machine until OK.

Bike Butyl Inner Tube Making Line has automatic temperature and time control system and operation. Easy installation, operation and maintenance, lower the running cost of the Bike Butyl Inner Tube Making Line.High effciency and good quailty of the Bike Butyl Inner Tube Making Line. Manufacturer of Bike Butyl Inner Tube Making Line is Qingdao Xincheng Yiming Rubber & Machinery Co.,Ltd. Bike Butyl Inner Tube Making Line is used for mixing and kneading raw rubber materials, synthetic rubber, thermoplastics or EVA with chemicals into every materials.Payment Terms of Bike Butyl Inner Tube Making Line is 40%T/T in advance, 60% balanced by T/T against the copy of B/L. Welcome you to inquire about Bike Butyl Inner Tube Making Line for more details. Look forward to mutually beneficial win-win cooperation with you. Our company offer service from soup to nuts. At the same time, can be customized according to customer's requirements of the Bike Butyl Inner Tube Making Line.

1. Bike Butyl Inner Tube Making Line has medium and high drum-shaped roller which increase the quality of rubber slice.

This processing technology, there is no air pollution, no waste water, low operation cost .Magnetic wire out reach 99%.

4. Adopt foreign technology to weld the steel pedestal which is non-deformation, non-fracture. It can avoid the expense caused by wrong operation.


Prev:PE Kneader Machine |Next:Waste Tyre Recycling Machine